Call Now Free Quote
(847) 713-1648 Request Free Estimate
Local service finder

Find services near you

Search a covered city or ZIP code, or use your location to find the nearest Delta service area.

or

Your location is used only in this browser to calculate the nearest area. It is not saved or transmitted.

Tuckpointing - Chicago, IL

Tuckpointing a Stair-Step Crack on a Chicago Brick Home

Completed April 2026 | Chicago

Mason grinding out a stair-step crack in the mortar joints of a brick gable wall in Chicago
During Grinding out the open joints along the stair-step crack
Location Chicago, IL
Service Tuckpointing
Scope Grind out and repoint a stair-step crack and failed joints on the side gable wall
Building Brick story-and-a-half home with dormers and limestone trim
Access Frame scaffolding with a rope hoist, plus extension ladders
Completed April 2026

The Problem

This tuckpointing job in Chicago started with a crack you could see from the yard. On the side gable wall of a brick story-and-a-half home, a stair-step crack ran through the mortar joints near the corner where the gable meets the eave, stepping down toward the head of a first-floor window. Several bed joints along its path had opened wide enough to see shadow inside them, and a few head joints had broken loose completely.

A crack that follows the mortar in a staircase pattern tells you the wall moved at some point and the joints gave way, since mortar is the weaker material. Settlement, movement at a window opening and seasonal expansion can all cause it. Once those joints are open, rain runs into the wall, and every Chicago winter freezes that water and pries the gap a little wider. Our guide to what stair-step cracks in brick mean covers the warning signs in more detail.

Our Solution

The crew set frame scaffolding with a rope hoist at the gable end, next to the chimney, and worked the lower section from extension ladders. Along the crack, each damaged joint was ground out with an angle grinder to remove the loose and cracked mortar and leave a clean, square slot. Grinding back to sound mortar matters. New mortar packed over loose material only covers the problem and lets go within a few seasons.

With the joints cleaned out, the crew repointed them with fresh mortar, packed tight and tooled to the profile used on the rest of the wall. On a dark, textured face brick with gray joints like this one, the new mortar needs to sit close to the existing color so the repair doesn’t read as a stripe across the gable. If you want to see the full sequence, we walk through what happens during a tuckpointing job step by step.

The Result

The stair-step crack is filled with solid mortar, and the open joints that were letting water into the gable wall are closed again. Stair-step crack repair at this stage keeps a localized problem from turning into loose brick and a much larger rebuild later. Homeowners pricing similar work can start with our Chicago tuckpointing cost guide. For a larger brick restoration in the city, see our commercial facade and parapet restoration in Chicago.

Project Location

Loading map - 1 project in this area

Need Similar Work? Let's Fix It Right.

Free on-site inspection and written estimate - no obligation. Serving the North Shore and Chicagoland for over 39 years.

(847) 713-1648 Request a Free Estimate