Call Now Free Quote
(847) 713-1648 Request Free Estimate
Local service finder

Find services near you

Search a covered city or ZIP code, or use your location to find the nearest Delta service area.

or

Your location is used only in this browser to calculate the nearest area. It is not saved or transmitted.

Commercial Tuckpointing - Evanston, IL

Commercial Tuckpointing on a Multi-Story Evanston Brick Building

Evanston

Masons in a boom lift basket tuckpointing the upper wall of a multi-story brick building in Evanston
During Working the upper wall from the boom lift
Location Evanston, IL
Scope Grind out and repoint mortar joints on the upper walls
Building Multi-story brick building with stone sills and recessed brick detailing
Access Articulating boom lift

The Problem

This commercial tuckpointing job in Evanston was on a multi-story brick building where the work sat well above anything a ladder or a short scaffold could reach. The walls are a mixed red and purple face brick in running bond, with stone sills under the windows and recessed brick bands and stepped corner details that create a lot of inside corners and ledges.

Those details look good, but they also collect water. Ledges and inside corners hold rain and snow longer than a flat wall, and the mortar joints around them tend to wear out first. On a tall building, open joints up high let water into the wall where nobody notices until it shows up as interior staining or loose brick. For a condo association or building owner, the hard part is usually access, not the repair itself.

Our Solution

Instead of scaffolding the whole elevation, the crew worked from an articulating boom lift. The basket can be set right against the wall at each work area and moved along the face without rebuilding scaffold, which keeps the ground clear and keeps the job moving. We compare the two approaches in our article on scaffold vs. boom lift access.

From the basket, deteriorated mortar was ground out of the joints with a grinder connected to a dust extraction vacuum riding on the lift. Capturing the dust at the blade keeps silica out of the air near windows and entrances on an occupied building, a topic we cover in our post on silica dust and masonry safety. The cleaned joints were then repointed with fresh mortar and tooled to match the existing joint profile. Working from the basket also lets the mason see every joint up close, so the worn areas around the sills and inside corners get attention instead of being missed from the ground.

The Result

The repointed joints close off the water entry points on the upper walls, and the boom lift let us reach them without a long scaffold setup in front of the building. For building managers, that combination keeps disruption low while the walls get the masonry tuckpointing they need. Our masonry services for property managers explain how we plan work on occupied buildings, and you can find more about our work in Evanston. For another commercial job, see our block building repair in Lake Bluff.

Project Location

Loading map - 1 project in this area

Need Similar Work? Let's Fix It Right.

Free on-site inspection and written estimate - no obligation. Serving the North Shore and Chicagoland for over 39 years.

(847) 713-1648 Request a Free Estimate