The Problem
The front entry walk at this Lake Forest home is laid in red brick pavers in a herringbone pattern, framed by a soldier course border, and leads up to a brick step at the front doors. Unlike sand-set pavers, these bricks are set in mortar, so the joints are what hold the surface together. Those joints had worn down and cracked, and this was a case for brick paver repair in Lake Forest that keeps the original walk.
Mortar joints in a walkway take a beating. They sit flat, hold water, and see foot traffic and snow shoveling all winter. Once a joint cracks, water gets under the pavers and freezes, which loosens the brick and pushes more mortar out. The front step shows the same kind of wear, with a crack running along one course of its face. Our guide to repairing a brick paver walkway explains why the joints are usually the first thing to go.
Our Solution
The job was to cut out the old joints and refill them while keeping the original bricks. The crew used a grinder fitted with a dust shroud and a vacuum hose, working joint by joint across the herringbone field and along the border. Grinding takes the old mortar out to a consistent depth so the new mortar has room to bond, and the shroud keeps silica dust off the house, the plantings and the crew. We wrote more about that in our post on silica dust and masonry safety.
After grinding, the joints are cleaned out, dampened and packed with fresh mortar, then tooled and brushed so the surface is flush and easy to sweep. Herringbone takes more care than a straight running pattern because every joint changes direction, so this kind of paver joint repair goes slower to keep the lines crisp. The soldier course border gets the same treatment, since it holds the field in place.
This is a typical job for our brick paver repair crew, and it costs far less than lifting and relaying the whole walk.
The Result
Repointing the joints keeps the original herringbone brick walkway, which has a weathered color that new pavers cannot match, and closes the paths water was using to get underneath. The photos here show the work in progress, and finished photos will be added. For more of our work in town, see our Lake Forest projects and services, or compare it with the new paver border we added in Lake Bluff.