Call Now Free Quote
(847) 713-1648 Request Free Estimate
Local service finder

Find services near you

Search a covered city or ZIP code, or use your location to find the nearest Delta service area.

or

Your location is used only in this browser to calculate the nearest area. It is not saved or transmitted.

Brick Paver Repair - Lake Bluff, IL

Brick Paver Walkway Border Along a Lake Bluff Backyard Path

Lake Bluff

Finished brick paver walkway border on both sides of a concrete walk in a Lake Bluff backyard
After Finished border on both sides, tying into the existing paver patio
Location Lake Bluff, IL
Scope New paver border along both sides of a concrete walk, plus patio joint refilling
Building Single-family home with a backyard concrete walk and paver patio

The Problem

This Lake Bluff backyard had a plain concrete walk running out toward the house, with lawn growing right up to the slab on both sides. The concrete was still usable, so the plan was to add a paver border along both edges. That gives a concrete path the look of a brick paver walkway without tearing out a slab that does not need replacing.

A border like this only lasts if it is built like a real paver installation. Pavers dropped into the lawn with no base and no edge restraint will heave in the first winter, sink where the soil is soft, and creep away from the slab. Grass grows into the gaps, and within a couple of seasons the edge looks worse than bare concrete did. Our guide to brick paver walkway repair shows what that failure looks like and why it happens.

Our Solution

The crew cut a trench along each side of the walk and installed plastic paver edge restraint, pinned into the ground with long spikes. The trenches were filled with a gravel base, then a sand setting bed. The pavers went down as a soldier course, each one turned across the border and set tight against the concrete.

At one end, the border follows a curve around a concrete slab, and each paver was placed to keep the joints even through the turn. Once a run was down, joint sand was swept into the gaps with a stiff brush so the pavers lock together and do not shift underfoot. The job also included refilling the joints on a patio, where fresh mortar was packed between large pavers and tooled smooth along an iron railing.

Partway down the walk, the new border meets an existing paver patio, so the new edge reads as one piece with the paving already in the yard. This is the kind of work our brick paver repair team handles, from new borders to resetting sunken sections and refilling worn joints.

The Result

The finished brick paver walkway now has a clean border on both sides, with the lawn cut back to a straight line along the edging. The concrete stays, but the path looks finished and ties into the patio pavers next to it. The edge restraint and base underneath are what keep that line straight through future winters. For a different kind of paver job, see our herringbone paver walkway repair in Lake Forest, or find more of our projects around Lake Bluff.

Project Location

Loading map - 1 project in this area

Need Similar Work? Let's Fix It Right.

Free on-site inspection and written estimate - no obligation. Serving the North Shore and Chicagoland for over 39 years.

(847) 713-1648 Request a Free Estimate